User manual

84
 Read road sign information out loud
 Use this setting to control whether road sign information is read out loud as part of navigation
instructions. For example, "Turn left onto A302 Bridge Street towards Islington."
 Read street names out loud
Use this setting to control whether street names are read out loud as part of navigation instruc-
tions. For example, when street names are read out loud, you hear "Turn left Graham Road
towards Hackney."
 Read foreign street names out loud
Use this setting to control whether foreign street names are read aloud as part of navigation
instructions, such as "Turn right onto Champs Élysées." For example, an English computer voice
can read and pronounce French street names but pronunciation may not be completely accu-
rate.
Language and Units
Select Settings in the Main Menu, then select Language & Units.
On this screen, you can change the following settings:
 Language
You can see your currently selected language on this screen. Select this setting to change the
language used for all buttons and messages that you see on your VIA.
When you change the language setting, the voice automatically changes and units are set to
automatic.
 Country
You can see your currently selected country on this screen. Select this setting to change the
country. When you change the country, the time/date format, distance units and voice are
changed automatically. The list includes the countries from the maps currently installed on your
device.
 Keyboards
Select this setting to choose from a list of available keyboards.
You use the keyboard to enter names and addresses, such as when you plan a route or search
for the name of a town or a local restaurant.
 Units
Select this setting to choose the units used on your device for features such as route planning. If
you want the units to be set to those used in your current location, select Automatic.
 Time and date
The time and date are automatically set by satellite clocks but you can change the format of
both the time and date using these settings.
System
Select Settings in the Main Menu, then select System.
On this screen, you can change these settings: