Operation Manual
6
When you reach the camera you are asked about the status of the camera. You are asked only once
about each fixed camera, and asked every time about a mobile camera.
If you pass a speed camera and do not receive a warning you can report it to TomTom.
Starting the Speed Cameras app
Select this button on your device to start the Speed Cameras app.
The language used for buttons and menus in the app is the same as the
language you selected in your device settings.
Closing the app
The app stays active and visible on your device screen.
Press the device Home button to return your device to the home screen. The app is not active and
does not give notification warnings and sounds. Eventually your device's operating system will close
the app.
Tip: When overlay mode is on, pressing the device Home button or Back button puts the app in
the background and shows the overlay panel. The app stays active and continues to give
notification warnings and sounds.
To close the app from the overlay panel, select the panel to open the quick-access menu, then
select Close app.
GPS reception
When you first start the Speed Cameras app, it may need a few minutes to find your current
location. To make sure you have good GPS reception, you should use your device outdoors. Large
objects such as tall buildings can sometimes interfere with reception.
If your device loses connection to your mobile network or loses GPS reception, the app stops
working and the message Network connection disabled or GPS is disabled is shown. Select Phone
settings to open your device's Settings app and check your device's connection settings.