User manual

17
QuickGPSFix helps your watch find your precise location quickly so that you can start your
activity. To update the QuickGPSFix information on your watch, connect your watch to your
computer. TomTom MySports Connect automatically updates QuickGPSFix on your watch.
QuickGPSFix information is valid for three days after you download it.
These symbols are used to show the status of QuickGPSFix:
QuickGPSFix on your watch is up to date.
QuickGPSFix on your watch is out of date. If the QuickGPSFix
information on your watch is out of date, your watch still works as
usual. It may, however, take longer to get a GPS fix when you want to
start an activity.
 VERSION - the software version number. You may need this information if you contact Customer
Support. Every time you connect your watch to your computer, TomTom MySports Connect
checks if a software update is available for your watch.
 SERIAL NUMBER - the serial number of your watch. You may need this information if you
contact Customer Support.
Performing a Reset
Soft reset
A soft reset is performed each time you disconnect your TomTom GPS watch from a wall charger or
computer.
To perform a soft reset on your watch, follow these steps:
1. Connect your watch to a wall charger or computer.
Wait until your watch shows a battery symbol.
If you are using a computer, wait until MySports Connect finishes updating your watch.
2. Disconnect your watch from the wall charger or computer.
The software on your watch restarts. This performs a soft reset on your watch.
Recovery mode
The recovery mode allows you to reinstall the software on your watch without deleting any personal
data and settings.
To perform a reset on your watch using the recovery mode, follow these steps:
1. Connect your watch to your computer and wait until MySports Connect finishes updating your
watch.
2. On your watch, move DOWN but keep the button pressed.*
3. Disconnect the USB cable from your computer.*
4. Keep pressing the button until your watch shows a watch connected with a computer and
tomtom.com/reset.
5. Release the button and connect the USB cable to your computer.
6. Click Update in MySports Connect.
* If the USB port on your computer is not easily accessible, connect the dock to the computer
without the watch. Then move down from the clock screen while you slide the watch into the
dock.
Factory reset
Important: When you perform a factory reset in MySports Connect, all personal data and settings,
including your export settings for MySports Connect, are deleted from your watch. This action
cannot be undone.