Operation Manual

60
Tracker
Switching off activity tracking
From the Clock screen on your watch, press DOWN to open the SETTINGS menu, then select
TRACKER. Activity tracking is ON by default so select OFF to switch off activity tracking.
GOALS
From the Clock screen on your watch, press DOWN to open the SETTINGS menu, then select
TRACKER. Press RIGHT to select GOALS.
For more information, see Setting a daily activity goal.
SLEEP
From the Clock screen on your watch, press DOWN to open the SETTINGS menu, then select
TRACKER. Press RIGHT to select SLEEP and then press RIGHT again to switch sleep tracking on or
off.
Note: You cannot set a sleep goal.
Playlists
You can select a playlist when not doing an activity from the SETTINGS menu.
From the Clock screen on your watch, press DOWN to open the SETTINGS menu, then select
PLAYLISTS.
Sensors
From the Clock screen press DOWN to open the SETTINGS menu, then select SENSORS and press
RIGHT to open the SENSORS menu.
You can switch on and off two types of sensors:
 HEART - this is a built-in or external heart rate sensor.
 BIKE - this is a cadence and speed sensor.
You can also calibrate the compass:
 COMPASS - this is a built-in compass that needs calibrating before first use and on a regular
basis thereafter to maintain accuracy.
Tip: To help your watch last for up to 20% longer on a battery charge, turn off sensors that you
are not using. Your watch keeps searching for sensors even if you are not using a sensor.
You can check if a heart rate sensor is working without having to start an activity. See Testing a
heart rate sensor.
Testing a heart rate sensor
You can check if a heart rate sensor is working without having to start an activity. Do the following:
1. From the Clock screen, press DOWN to open the SETTINGS menu.
2. Select SENSORS and press RIGHT to open the SENSORS menu.
3. Select HEART and press RIGHT.
You see ON, OFF or EXTERNAL. If the setting is set to ON or EXTERNAL you see bpm which
means that your heart rate is measured in beats per minute.
You then see either your heart rate shown immediately or dashes which blink to show that your
watch is searching for the heart rate sensor.