Operation Manual

Tip: A scale bar is shown at the bottom of the screen and the trail orientation is always North

Up.

Following a new trail

Note: Available for all GPS-based activities: Run/Cycle/Freestyle (Runner3 and Spark3) and Trail

running/Hiking (TomTom Adventurer)

You can use your TomTom Adventurer Watch to follow a new trail that has been uploaded to your

watch from MySports. During your trail run, you see the same metrics as for a run but with the

addition of elevation information.

To run a new trail, do the following :

1. Press RIGHT from the clock screen and then press UP or DOWN to select TRAIL RUN.

2. Press DOWN to go to the SETTINGS screen and select TRAILS.

Tip: Whilst in SETTINGS, you can also choose a training program, set metrics, choose a playlist

or switch splits on or off.

3. Select a trail from the list.

For more information about what you see on the screen, see About viewing trails.

Note: It is important to regularly calibrate the compass to ensure its accuracy.

Manage trails with MySports

Note: Available for all GPS-based activities: Run/Cycle/Freestyle (Runner3 and Spark3) and Trail

running/Hiking (TomTom Adventurer)

You use MySports to preload a trail onto your TomTom GPS Watch for use during an activity and to

manage trails.