Reference Guide

17
7. When you have planned your thrilling route, select Ride.
Your route is shown on the map view, then guidance along your route begins. As soon as you
start riding, the guidance view is shown automatically.
Looking at trip statistics
Your Rider can show you how far you've been riding, how long you've been riding, and also at what
speed.
To see trip statistics, select Trip Statistics in the Main Menu.
Select one of the three tabs to see statistics for today's riding, for your current trip and for all-time.
Tip: All-Time are the statistics that have been collected since the device was purchased and first
switched on.
Tip: A dot is included in large distances, for example, 20047,64 kilometers is shown as 20.047,6
km.
Statistics for your current trip
To see statistics for the trip you are riding now, select the Since --/--/-- tab.
To start a new trip, select the Clear trip button, just like resetting an odometer in a car.
After stopping your bike, if you don't press the Clear trip button, the statistics just carry on
incrementing when you start moving again. This means you get accurate statistics for trips that span
several days or several rides within a day.
Important: If you do a factory reset, the all-time tab is reset back to zero values!
Using quick settings
Quick settings make it easier for you to use a range of settings when wearing gloves.
Using quick settings you can do the following:
 Switch voice instructions on or off.
 Mute the volume.
 Switch between lighter and darker colors.
 Change the volume of instructions.
See Other buttons and Volume control for more details.
Important: When using a headset, the volume control may not be available because your headset
doesn't support remote volume control. If this is the case, use the volume control button on the
headset itself to change the volume.