Reference Guide

12
The instructions below describe how to set up a Bluetooth® headset. If you did not establish a
Bluetooth connection between your Bluetooth headset and your TomTom Rider when you first
turned your TomTom Rider on, you can establish the connection at any time by doing the following:
1. Turn the headset on by following the user instructions for your headset.
2. From the Main Menu, select Settings.
3. Select Bluetooth Connections.
4. Select Search for Headset and follow the instructions to establish the connection.
5. Attach your headset to your helmet.
Make sure you position the microphone correctly. For best results, don’t position the micro-
phone directly in front of your mouth, position it just to the side of your mouth.
An image of the parts of a typical headset is shown below:
1. Microphone
2. On/Off button
3. Speakers
4. LED
5. Volume down
6. Volume up
7. Charging connector
Before you can use your Bluetooth headset, fully charge the headset using the charger supplied with
the headset.
Important: When using a headset, the volume control may not be available because your headset
doesn't support remote volume control. If this is the case, use the volume control button on the
headset itself to change the volume.
Navigation buttons
On the map view or guidance view, select the Main Menu button to open the Main Menu.
The following navigation buttons are available in the Main Menu:
Note: Not all features are supported on all devices.