Operation Manual

The blinking icon represents your cursor. Simply use the joystick to move the cursor around the map.
You can also increase or decrease the scale of the map. To zoom in press the joystick. To zoom out use the "0" key. The map will zoom in (or out) relative to your cursor position.
To display the map broser menu, select Options. The following options are available:
option function
Show information
Show information causes details of the current cursor position to be displayed on the map.
Use cursor...
Use cursor... provides functions for your cursor location (i.e. the location indicated by the blinking icon). You can:
• calculate a route from your current location to the cursor location
• find a point of interest near the cursor location
• centre the map around the cursor location
• turn the cursor location into a favourite
Find...
Find... allows you to search for a specific location and place your cursor there. You use it to locate:
• an address
• one of your favourite locations
• your home location
• a recent destination
• a nearby point of interest (e.g. a hotel or petrol station)
• your current GPS position
Related topic:
To learn more about the options to search a location, see the "Picking locations " description.
Change preferences
Change preferences allows you to change the items that are currently being displayed on the map:
• show the number of roads and streets
• show the number of street names
• show or hide all points of interest
• show or hide all favourites
Select POI to use the Enable/Disable POI preference to specify which categories of points of interest can be displayed.
Note:
The option to show or hide all points of interest in this menu is the same as Show POI / Hide POI preference. Changes have direct effect on this
preference.
How to zoom...
How to zoom...
• press the joystick to zoom in
• press " 0 " to zoom out
• press 1 - 9 to select one of the 9 main zoom levels
Select Cancel to return to the main screen.
1.5. The schematic view
Instead of the main screen, a much simpler, schematic design can be used to display driving instructions. Some people prefer the simplicity of this "at-a-glance" schematic display.
You can switch to the schematic display using the turn off map display preference.
You can also set TomTom MOBILE to hide the map only when you go faster than a certain speed.