Operation Manual

To navigate with the schematic view, see the "Turn off map display" preference option
4.3. Turn off map display / Turn on map display
You can navigate using either the map display or the schematic display. The map display gives you the most detailed information about your current situation, including a map. The schematic view
is focused on the next driving instruction.
If map display is used, switch to the schematic display by selecting Turn off map display .
If schematic display is used, switch on the map display by selecting Turn on map display .
Related topics:
For more details about the schematic view, see the "schematic view" description.
Note:
If you have set a schematic speed your display will automatically turn off the map display when your driving speed exceeds the schematic speed. The "turn map display on" option will NOT override
this safety feature.
4.4. Hide POI / Show POI
The main screen can show points of interest (POI) as icons in the map. Every category of POI will be shown using its own icon. This Hide POI/Show POI preference either shows all specified POI
categories or no POI on the map.
If Points Of Interest are shown, they can be hidden by selecting Hide POI .
If no Points Of Interest are shown, you can make them appear by selecting Show POI .
Note:
Only those categories of POI that have been enabled will be shown; If no POI categories have been enabled, you will not see any POI on the map even if you use the "Show POI" option.
Related topics:
To specify which particular categories of Point Of Interest are shown, use the "Enable/Disable POI" preference option.
4.5. Turn off sound / Turn on sound
You can turn off the voice that gives navigation instructions. You will then have to rely on the visual instructions on your screen to navigate. To hear the navigation instructions again, turn on the
sound once more. If the sound is switched off, this is indicated during navigation by the icon in the lower left-hand corner of the screen.
If the sound is currently switched on, switch it off by selecting Turn off sound .
If the sound is currently switched off, switch it on by selecting Turn on sound .
Related topics:
To change the volume of the spoken instructions, use the "change volume" preference option.
To select another voice, use the "change voice" preference option.