User manual

41
Tip: To see more results, hide the keyboard or scroll down the results list.
Tip: You can switch between seeing the results on the map or in a list by selecting the list/map button:
3. Select the contact you want.
Your contact is shown on the map.
Note: If your contact has multiple addresses, all the locations are shown on the map. Select a location to
show the address
4. To plan a route to this destination, select Drive.
A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance
view is shown automatically.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time
difference in hours and half hours in the arrival information panel. The estimated time of arrival is the
local time at your destination.
Tip: You can add a stop to a route that you have already planned.
Planning a route using the map
Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a
route before you start driving.
To plan a route using the map, do the following:
1. Move the map (page 18
) and zoom in until you can see the destination that you want to navigate to.
Tip: You can also select a map symbol to open the pop-up menu, then select the Drive button to plan a
route to that location.