User manual

Table Of Contents
4
GET GOING
Device mounting
1. Connect your device’s USB cable to the mount
2. Connect the other end of the USB cable to the charger
3. Insert the charger into your vehicle’s power socket
4. Place your mount on a smooth surface (e.g., your windshield, driver’s side window, dashboard
using the dashboard mounting disk)
Make sure that your device does not obstruct your dashboard, vehicle controls, rear-viewmirrors,
airbags and field of vision. To maintain an optimal satellite signal, ensure that your device remains
upright during use.
NOTE: To ensure that your TomTom GO Camper Max remains suciently powered throughout
your drives, only use the car charger supplied with your TomTom GO Camper Max”
Powering on and o
Switch on your device by pressing the On/O button
Press and hold the On/O button for two (2) seconds then tap eitherTurn oorSleepto switch
o your device or to activate sleep mode.
Pressing and holding the On/O button for more than five (5) seconds will switch o your device.
Sharing information with TomTom
Upon activating your TomTom GO Camper Max (i.e., during the First Run Wizard), we will ask for
your consent to share data about yourlocations and stored routes.
Doing this will help us improve our products.The collected information will be stored on your
device until we retrieve andanonymizeit. If you use TomTom Services (e.g. live trac, speed
camera alerts), we will use your location information to deliver these services to you. Once you
have set up your information sharing preferences, you can adjust them as follows:
1. Go toSettingsin the main menu
2. TapSystem
3. ThenYour information and privacy
4. Now adjust your information sharing preferences
To see more about what we are doing to protect your privacy, please visittomtom.com/privacy
NOTE: Information sharing allows for the smooth operation of TomTom Services including trac,
speed cameras. Withholding consent to share your location information will disable your TomTom
Services.
Caring for your TomTom GO Camper Max
To ensure optimal device performance:
1. Do not open your device’s housing. Doing so is dangerous and will invalidate your device’s
warranty.
2. Use a soft cloth to wipe and dry your device’s screen. Avoid using liquid cleaners.