Operation Manual

72
The first time you use Home to work, you must set your traffic home and work
locations.
You can now use the Home to work and Work to home buttons.
Note: The home location you set here is not the same as the home location
you can set in the Preferences Menu. In addition, the locations you use here
do not have to be your actual home and work locations. If there is another
route that you often travel, you can set Work/Home to use these locations
instead.
For example, to check for delays on your route home before you leave the
office, do the following:
1. Tap the traffic sidebar to open the Traffic menu.
2. Tap Show home-work traffic.
3. Tap Work to home.
The Driving View is shown and a message is displayed telling you about traffic
incidents on this route. The Traffic sidebar also shows any delays.
Checking traffic incidents in your area
Get an overview of the traffic situation in your area, using the map. To find
local incidents and their details, do the following:
1. Tap the traffic sidebar to open the Traffic menu.
2. Tap Browse map.
The map browser screen is shown.
3. If the map does not show your location, tap the marker to centre the map
on your current location.
The map shows traffic incidents in the area.
Change
home-work
1. Tap the traffic sidebar to open the Traffic menu.
2. Tap Show home-work traffic.
3. Set your home location and your work location.
If you have already set the locations and want to change them, tap
Change home-work.
Browse map