User guide

47
Changing the way you are warned - speed cameras
To change the way your TomTom GO navigation device warns you about speed cameras, select
the Sounds and Warnings button in the Settings Menu.
You can then set how you want to be warned for the different types of cameras and safety zones.
You can change settings for whether you want to be warned, never warned or warned only if you
are speeding.
For example, to change how you are warned when you approach a fixed speed camera, do the
following:
1. Select Sounds and Warnings in the Settings Menu.
2. Select Speed camera warnings.
3. Select Fixed cameras.
4. Select whether you always want to be warned or warned only when you are speeding. Select
Never to turn off the warning.
5. Select the back button.
Tip: To turn off all audible warnings, select Settings, followed by Sounds and Warnings and
then switch off Warning sounds.
Speed camera symbols
Speed cameras are shown as symbols in the guidance view.
As you approach a camera, you see a symbol showing the kind of camera and the distance to the
camera. A warning sound is played. You can change the way you are warned about speed cam-
eras.
When you first start using your device, warning sounds are played for these types of cameras:
Symbol shown
in route bar
Description
Fixed speed camera - this type of camera checks the speed of passing vehicles
and is fixed in one place.
Mobile speed camera - this type of camera checks the speed of passing vehicles
and is moved to different places.
Mobile speed camera hotspots - this type of warning shows places where mo-
bile cameras are often used.
Average speed zones - these types of cameras measure your average speed
between two points. You are warned at the start and end of the average speed
check zone.
While you are driving in an average speed check area, your average speed is