Operation Manual

92
Van
Select Van when you are driving a private van, a rental van, or other
large, non-commercial vehicle.
Set up your vehicle
Before you can plan a route using roads suitable for your vehicle type you must first enter the
details for your vehicle or vehicle combination.
1. Tap Settings in the Main Menu.
2. Tap Vehicle and routes, and then tap Vehicles and route types.
3. Tap your vehicle type. You can enter details for a Car with caravan, a Camper, and a Van.
Note: The Car button opens the standard route planning options.
4. On the Current vehicle profile screen, tap Change.
5. Enter the vehicle's weights, dimensions and speed limit. Press Next each time to move to the
next screen.
Note: The speed limit can be different in each state or country, and different for each type of
vehicle. You must enter the speed limit for the country you are travelling in.
Important: The dimensions and weight for your caravan also include your car's dimensions
and weight.
6. In Avoid motorways, choose whether you want to avoid motorways. Tap Next.
7. In Restriction and dead-end warnings, choose if you want to receive warnings about re-
strictions and dead-ends. Tap Next.
Important: Set this option to Yes if you are driving a large camper or when towing a caravan.
This option prevents you from driving into a difficult situation, such as a place where it is dif-
ficult to turn, or which has a height restriction. You only receive restriction and dead-end
warnings when you are driving with no route planned.
8. Set the Replanning settings.
Note: This setting is only available if your device has either a traffic subscription or an
RDS-TMC Receiver. Traffic information is not available in all countries or regions. For more
information about TomTom traffic information services, go to tomtom.com/services.
Set whether you want your navigation device to replan the current route if a faster route is
found while you are driving. This is useful if traffic builds up or clears further ahead on your
route. Choose from the following settings:
 Always switch to that route - select this option to receive no messages when a faster
route is found. The current route is automatically re-calculated to be the fastest one.
 Ask me if I want that route - select this option to be asked if you want to take the new
route. When asked if you wish to take the alternative route, tap Yes to have the current
route re-calculated as the fastest one. Tap No if you don't want to take the alternative
route. If you change your mind, tap the balloon at the top of the screen to take the alterna-
tive route.
 Never change my route - select this option to always continue on your planned route.
Tap Next.