Cell Phone User Manual

Putting the Advanced Car Kit into service
17
3. Putting the Advanced Car Kit
into service
A compatible mobile phone can be connected to the Advanced Car Kit
in one of two ways: over a Bluetooth wireless connection or using a
compatible phone holder with a cable.
■ Connecting a mobile phone using
Bluetooth wireless technology
The first time you establish a wireless link from your Advanced Car Kit
using Bluetooth technology, you will have to pair the handsfree unit
with the compatible mobile phone that you are using. This only needs to
be done once: after this the devices will automatically recognise each
other and establish the link.
Note: If you wish to establish a connection using Bluetooth
wireless technology, make sure that there is no mobile phone
inserted in the phone holder.
Pairing using a Bluetooth passcode
1. Make sure that the mobile phone is switched on and the battery is
charged.
2. Switch on the Advanced Car Kit. For further information, see
“Switching the Advanced Car Kit on/off,” p 20.
3. Open the Bluetooth menu in the mobile phone and activate the
Bluetooth function.
4. Make the required settings on the mobile phone to activate a search
for Bluetooth devices within range. For further information on the
settings required on your mobile phone, see the relevant user guide.
5. Select Advanced Car Kit from the list of Bluetooth devices found.
6. When prompted, key in the Bluetooth passcode 0000.