TomTom car kit for iPhone for in-car installation
TomTom car kit TomTom car kit Installation The TomTom car kit for iPhone has been designed to be used with ProClip mounting solutions. For more information about ProClip and to order the correct ProClip for your car, go to tomtom-proclip.com. Install the ProClip according to the instructions included with your ProClip. Attach the TomTom car kit for iPhone to the ProClip mount using the screws provided.
EN TomTom car kit Placing your iPhone in the TomTom car kit Carefully place your iPhone into the car kit. Start by placing the bottom of the iPhone on the connector, then push the top of the iPhone securely into place. You can rotate the holder and adjust the height of the holder to find the best position and orientation for your iPhone.
TomTom car kit Bluetooth connection for hands-free calls To use your iPhone with the TomTom car kit to make hands-free calls, you need to establish a Bluetooth connection by pairing the devices in the following way: 1. Place your iPhone in the car kit and connect the car charger. 2. Tap Settings on the main screen of your iPhone. 3. Tap General, then tap Bluetooth. 4. Switch on Bluetooth. Your iPhone searches for Bluetooth devices. TomTom car kit appears in the list of devices. 5. Tap TomTom car kit. 6.
EN TomTom car kit Bluetooth reset and volume control The TomTom car kit can pair with up to 8 different iPhones. To remove all paired devices, or if the car kit does not connect properly to your iPhone, press and hold the volume button for 8 seconds. You should now establish the Bluetooth connection between your iPhone and the car kit again. To adjust the volume, move the volume control up or down.
Addendum Addendum Important Safety Notices and Warnings Note: this Minnesota Stature applies to anyone driving in Minnesota, not just Minnesota residents. Global Positioning System The Global Positioning System (GPS) is a satellite-based system that provides location and timing information around the globe. GPS is operated and controlled under the sole responsibility of the Government of the United States of America which is responsible for its availability and accuracy.
Addendum and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation distance between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult an experienced radio/TV technician for help. local municipal collection point for recycling.
Addendum This Document 1. This device may not cause harmful interference. Great care was taken in preparing this manual. Constant product development may mean that some information is not entirely up to date. The information in this document is subject to change without notice. 2. This device must accept any interference received, including interference that may cause undesired operation.
