Operation Manual

96
Note: If the type of camera you choose has a speed restriction, you can also enter the speed.
2. You see a message confirming that a report has been created.
Reporting a new speed camera while at home
You do not need to be at the location of a speed camera to report the new location. To report a
new speed camera location while you are at home, do the following:
1. Tap Services in the Main Menu on your navigation device.
2. Tap Speed Cameras.
3. Tap Report safety camera.
4. Tap the type of camera you want to report.
5. Use the cursor to mark the exact location of the camera on the map, then tap Next.
6. Tap Yes to confirm the location of the camera.
7. If necessary, choose the speed restriction for the camera.
You see a message confirming that a report has been created.
Reporting incorrect camera alerts
You may receive an alert for a camera that is no longer there. To report an incorrect camera alert,
do the following:
Note: You can only report an incorrect camera alert while you are at the location.
1. While you are at the location of the missing camera, tap Report in the Driving View.
Note: This must be done within 20 seconds of receiving the camera alert.
2. Tap No when asked if the camera still exists.
Note: It's possible to report or confirm the location of danger zones, but it's not possible to
remove them.
Types of fixed speed camera you can report
When you report a fixed speed camera, you can select the type of fixed camera you are reporting.
These are the different types of fixed speed camera:
Fixed camera
This type of speed camera checks the speed of passing vehicles.
Red light camera
This type of camera checks for vehicles breaking traffic rules at traffic
lights.