Operation Manual

93
About Speed Cameras
Note: LIVE Services are not available in all countries or regions, and not all LIVE Services are
available in all countries or regions. You may be able to use LIVE Services when travelling
abroad. For more information on available services, go to tomtom.com/services.
The Speed Cameras service warns you about a range of speed cameras and safety alerts including
the following:
 Fixed speed camera locations.
 Accident blackspot locations.
 Mobile speed camera locations.
 Average speed check camera locations.
 Traffic light camera locations.
 Ungated railway crossings.
Note: In France, no warnings are given for individual cameras or different types of camera. It is
only possible to warn about danger zones. Danger zones are areas where there may be camer-
as. It's possible to report or confirm the location of danger zones, but it's not possible to remove
them.
Speed camera warnings
By default, warnings are given 15 seconds before you reach a speed camera location. To change
the warning sound and when to be warned, tap Alert settings in the Speed Cameras menu.
You are warned in three ways:
 Your device plays a warning sound.
 The type of speed camera and your distance from the camera location is shown in the Driving
View. If a speed restriction has been reported for the camera, the speed is also shown in the
Driving View.
 The location of the speed camera is shown on the map.
Note: For average speed cameras, you are warned by a combination of icons and sounds at the
start, middle and end of the average speed check zone.
Changing the way you are warned
Alert settings
To change the way your Blue&Me-TomTom 2 LIVE warns you about
speed cameras, tap the Alert settings button.
You can set under which conditions you are warned and what type of
sound will be played.
For example, to change the sound that is played when you approach a
fixed speed camera, do the following:
Speed Cameras