Blue&Me-TomTom 2 LIVE Reference Guide
Contents Welcome to navigation with TomTom 7 What's in the box 8 Read me first 9 Installing the Dock ..............................................................................................................................9 Switching on and off ..........................................................................................................................9 Setting up..........................................................................................................................
Media Player 24 Media Player .....................................................................................................................................24 Using the Media Player ....................................................................................................................24 Points of Interest 26 Low Fuel Warning 27 MyDrive for Blue&Me-TomTom 2 LIVE 28 MyDrive .............................................................................................................
View map 50 About viewing the map ....................................................................................................................50 View map ..........................................................................................................................................51 Options..............................................................................................................................................52 Cursor menu ...........................................
Points of Interest 70 About Points of Interest ...................................................................................................................70 Creating POIs ....................................................................................................................................70 Using POIs to plan a route ...............................................................................................................72 Showing POIs on the map ...............................
Taking the fastest route ....................................................................................................................87 Minimising delays.............................................................................................................................87 Making commuting to work easier ..................................................................................................87 Getting more information about an incident................................................
Welcome to navigation with TomTom This Reference Guide explains all you need to know about your new Blue&Me-TomTom 2 LIVE navigation device. If you want a quick read of the essentials, we recommend that you read the Read me first chapter. This covers installation, switching on, setting up and updating using MyDrive. After that, you will probably want to look at route planning and you can read all about that in the Planning a route chapter.
What's in the box Blue&Me-TomTom 2 LIVE Dock USB cable Documentation 8
Read me first Installing the Dock Use the Dock to install your Blue&Me-TomTom 2 navigation device inside the car. To attach the Dock, insert the base of the dock into the dash plug on the car dashboard or A-pillar. To insert your navigation device into the dock, push the button on the front of the dock to open the top bracket. Place the bottom of the device into the dock and then push the top bracket of the dock down until it clicks into place.
To ensure good GPS reception, you should use your device outdoors and keep your device upright. Large objects such as tall buildings can sometimes interfere with reception. GPS reception can also be affected if the device is placed flat on a surface or held flat in your hand. About MyDrive MyDrive is a web-based tool that helps you manage the contents and services of your Blue&Me-TomTom 2 LIVE navigation device. You use MyDrive to get map updates as well as lots of other things.
When set-up is complete, a MyTomTom account is created and your navigation device is linked to that account. You can now access MyDrive Connect from the notification area on your desktop. MyDrive starts automatically after the account is created. Note: Next time you want to access MyDrive, go to tomtom.com/mydrive in a web browser. Tip: When you connect your navigation device to your computer, MyDrive Connect tells you if there are any updates for your device.
For more information, see our privacy policy at tomtom.com/privacy. Safety Notice Your Blue&Me-TomTom 2 LIVE device contains a GSM/GPRS module which can interfere with electrical devices such as cardiac pacemakers, hearing aids and aviation equipment. Interference with these devices may endanger the health or life of you or others. Do not use it near unprotected electrical units or in areas where the use of mobile telephones is prohibited, such as hospitals and airplanes.
Blue&Me-specific functions 13
Blue&Me controls Steering wheel controls You can control most of the functions on your Blue&Me-TomTom 2 navigation device using the buttons on the car steering wheel. To do this, press MAIN/MENU, then use the arrow keys to highlight SAT NAV, then press SRC/OK.
Pairing and connection Your Blue&Me-TomTom 2 LIVE navigation device and Blue&Me in your car communicate with each other using a Bluetooth connection. To pair your navigation device with Blue&Me, do the following: 1. Turn your car key to the MAR position. 2. Press the MAIN button on your steering wheel to open the main menu of Blue&Me in the cluster display of your car. 3. Use the arrow buttons on the steering wheel to navigate to the settings menu. 4. Select Settings and then Pairing/User Pairing.
When your navigation device and your car have been paired, the Car Menu button appears in the Main Menu of the navigation device. From the Car Menu, you can access the functions specific to your Blue&Me-TomTom 2. The Car Menu button changes depending on the model of your car, and is updated whenever you connect your device with a new car.
Synchronising your settings You can synchronise some settings on your Blue&Me-TomTom 2 navigation device with your car settings. Settings that can be synchronised include language, time and units. You can also select to use a branded car symbol and start-up screen that matches your car. When you first connect your navigation device to Blue&Me, automatic synchronisation of settings is switched on.
Car Menu Car Menu Tap Car Menu in the Main Menu to access Telephone, Trip Computer, eco:Drive info (or Fuel efficiency info, or EcoTrend info depending on your car) and Media player. Tip: The car image displayed in the Car Menu button and in the buttons within the Car Menu is branded. It resembles the car that the navigation device is connected to.
The Car Menu looks as follows for different brands of car: Telephone You can use your Blue&Me-TomTom 2 LIVE navigation device to manage your hands-free calls. You should establish a Bluetooth connection between your phone and Blue&Me in your car, and not between your phone and the navigation device. You can also use Blue&Me to handle hands-free phone calls without the navigation device.
Answering a phone call When someone calls you, the caller's name and phone number are shown. Tap the buttons on the screen of your Blue&Me-TomTom 2 navigation device to accept or reject incoming calls. During a call, tap this button in the Driving View to access the Call... menu. Using this menu you can end the call, switch between calls or access the Telephone menu. Telephone menu To access the Telephone menu, do the following: 1. Tap Car menu in the Main Menu on your navigation device. 2. Tap Telephone.
Driving style information Driving style information helps you drive in a way that limits the environmental impact. It can improve the efficiency of your driving by analysing your driving style. It helps you to use less fuel, reduce CO2 emissions and save money. On the left of the screen for cars where a gear shift indicator is available, the indicator suggests when you should change gear by repeating the information shown in the gear shift indicator on the cluster display.
The screen is shown until you tap Done. Information about your driving style is not available for all types of car engine. If you are using LPG fuel, the fuel efficiency information is only shown to provide an estimation of your driving style. If you are using CNG fuel, this function is not available.
Voice command and control Voice control There are two types of voice control. The first type is provided by Blue&Me and you can use it to control Blue&Me features. You do this using a button on your steering wheel. The second type is provided by your navigation device and you can use it to plan routes and control other features of your navigation device. You do this by tapping the voice control button in the Driving View of the navigation device.
Media Player Media Player You can use your Blue&Me-TomTom 2 navigation device to operate the Blue&Me Media Player. You can also use Blue&Me in your car to operate the Media Player without using the navigation device. However, if the navigation device is in the Dock and switched on, you can control the Media Player through the navigation device. Using the Media Player To start using the Media Player, do the following: 1.
Tap USB library to open the library menu. Tap Play anything to select a song at random. The Media Player starts playing this song. When the Media Player starts playing a new song, a message is displayed showing the title of the song. Tap the other buttons to select a song using that category. Tap USB settings to open the USB settings menu.
Points of Interest Points of Interest or POIs are useful places on the map. Here are some examples: Fiat, Lancia, Alfa Romeo, Fiat Professional and Chrysler UK service points Hotels Restaurants Parking garages Petrol stations including CNG and LPG Your Blue&Me-TomTom 2 LIVE navigation device comes with a European-wide list of Fiat, Lancia, Alfa Romeo, Fiat Professional service points and Chrysler service points in the UK and LPG/CNG petrol stations.
Low Fuel Warning When the amount of fuel in your car drops into the reserve, your Blue&Me-TomTom 2 LIVE navigation device gives you a warning. Tap Yes to be routed to the petrol station that is closest to your route. If you do not have a route planned, tap Yes to be taken to the closest petrol station to your current location. Your Blue&Me-TomTom 2 navigation device knows which type of fuel your car uses and guides you to a petrol station that offers you the correct fuel type.
MyDrive for Blue&Me-TomTom 2 LIVE MyDrive The MyDrive pages of tomtom.com on your computer have an appearance that matches the brand of your car. Your Blue&Me-TomTom 2 navigation device remembers the brand of your car and the MyDrive pages of tomtom.com are updated to match your car. For more information about MyDrive, see the chapter About MyDrive.
TomTom functions 29
Planning a route Planning a route Important: In the interest of safety and to reduce distractions while you are driving, you should always plan a route before you start driving. To plan a route on your Blue&Me-TomTom 2 LIVE, do the following: 1. Tap the screen to open the Main menu. 2. Tap Navigate to... 3. Tap Address. You can change the country or state setting by tapping the flag before you select a city. 4. Enter the town or city name.
Streets with similar names are shown in the list while you type. When the correct streetname appears in the list, tap the name to select the destination. 6. Enter the house number, then tap Done. 7. The location is shown on the map. Tap Select to continue or tap Back to enter another address. Tip: If you want your final destination to be a car park, tap Park nearby and select a location from the list of car parks close to your general destination. 8. When the new route is shown, tap Done.
To plan a different route, tap Change route. Your Blue&Me-TomTom 2 starts to guide you to your destination, using spoken instructions and onscreen directions. Route summary The route summary shows an overview of your route, the remaining distance to your destination and the remaining estimated journey time. To view the route summary, tap the right-hand panel on the status bar in the Driving view or tap View route in the Main Menu and then tap Show route summary.
LIVE summary LIVE summary shows LIVE Services information on your route. To view LIVE summary information, tap the LIVE tab on the route summary screen. Tap any of the panels for more detailed information. The LIVE tab panels show the following information: Traffic on route - tap this panel to view detailed information about traffic delays and other incidents on your route. Speed cameras or danger zones - tap this panel to open the Speed Cameras or Danger Zones menu.
Fastest route - the route which takes the least time. Eco route - the most fuel-efficient route for your journey. Shortest route - the shortest distance between the locations you set. This may not be the quickest route, especially if the shortest route is through a town or city. Avoid motorways - a route which avoids motorways. Walking route - a route designed for making the journey on foot. Bicycle route - a route designed for making the journey on a bicycle.
Every time your device starts, you are asked if you want to plan a route. If you tap Cancel, you are shown the Driving View. Using arrival times You can set your Blue&Me-TomTom 2 LIVE device to ask you if you need to arrive at a particular time when you plan a route. Tap Status bar in the Settings menu, to enable or disable arrival time notifications. To enable arrival time notifications, select Leeway. Status bar After planning a route, tap YES to enter a preferred arrival time.
Tap this button to enter an address or postcode as your destination. Address In some countries, the postcode can be used to identify the place and street. In other countries, the postcode only identifies the place, so you need to enter the street name separately. Tap this button to select your destination from a list of places you have recently used as destinations. Recent destination Tap this button to navigate to a Point of Interest (POI).
You can also compare journey times for the same route at different times of the day or on different days of the week. Your device uses IQ Routes when planning a route. IQ Routes calculates routes based on the real average speeds measured on roads. Study the route of a journey you are planning. Check a route for someone who is coming to visit you and then explain the route to them in detail. To plan a route in advance, follow these steps: 1. Tap the screen to bring up the Main menu. 2.
Tap this button to see an overview of the route using the map browser. Show map of route Tap this button to watch a demo of the journey. You can interrupt the demo at any time by tapping the screen. Show route demo Tap this button to open the route summary screen. Show route summary Tap this button to see a preview of your destination. Show destination You can navigate to a car park near your destination, and view any available information about your destination, for example, the phone number.
Voice control Voice control There are two types of voice control. The first type is provided by Blue&Me and you can use it to control Blue&Me features. You do this using a button on your steering wheel. The second type is provided by your navigation device and you can use it to plan routes and control other features of your navigation device. You do this by tapping the voice control button in the Driving View of the navigation device.
2. When you hear "Say a command" followed by a beep, say a command of your choice. For example, you can say "Drive home". Your device is only ready to listen after your hear the beep. While you are speaking the microphone monitor shows how well the device can hear your voice. A green bar means the device can hear your voice. A red bar means your voice is too loud for the device to recognise individual words. A grey bar means your voice is too quiet for the device to recognise individual words.
3. Say the name of the town. Your device shows a list of towns which sound similar to what you said and tells you which town is at the top of the list. If the town you hear is the same as the town you requested then say, "Done" or "OK" or "Yes" or "One" or tap the town at the top of the list. If the town you hear is incorrect, but the correct town is in the list, say the number next to the correct town or tap the name of the town.
Important: Numbers need to be spoken in the same language as the button names and menus on your device. Numbers should be pronounced in the same way you normally say a number, in one continuous sentence. So 357 is pronounced, "Three hundred and fifty seven." If the number is shown correctly then say, "Done" or "OK" or tap the keyboard to enter the number. If the number is shown incorrectly then say, "Back" or "No" or tap the Backspace key and repeat the number.
Cities and towns and their centres. Favourites, postcodes and POIs. Plan alternative route, Recalculate original, Avoid roadblock, Minimise delays, Clear route, Travel via... and Recent destination. Tap this button at the base of the keyboard to use speech to enter an address. When the button is grey, you cannot use speech to enter an address. Tips Your Blue&Me-TomTom 2 recognises places and streetnames when they are spoken in the local language using local pronunciation.
The Driving View About the Driving View When your Blue&Me-TomTom 2 LIVE navigation device starts for the first time, you are shown the Driving View along with detailed information about your current position. Tap the centre of the screen at any time to open the Main Menu. You can choose the screen shown when you switch on your device by tapping Settings in the Main Menu, then tapping Start up. The Driving View 1. Zoom button - tap the magnifying glass to show buttons for zooming in and out. 2.
Tap this part of the status bar to repeat the last voice instruction and to change the volume. You can also tap here to mute the sound. 11. The remaining journey time, the remaining distance and your estimated arrival time. Tap this part of the status bar to open the Route Summary screen. To change the information shown in the status bar, tap Status bar in the Settings menu.
Advanced Lane Guidance About lane guidance Note: Lane guidance is not available for all junctions or in all countries. Your Blue&Me-TomTom 2 navigation device helps you prepare for motorway exits and junctions by showing the correct driving lane for your planned route. As you approach an exit or junction, the lane you need is shown on the screen. Using lane guidance There are two types of lane guidance: Lane images To turn lane images off, tap Settings in the Main menu, then tap Advanced settings.
Tip: If no lane guidance is shown in the status bar and all lanes are highlighted, you can use any lane.
Changing your route Making changes to your route After you plan a route, you may want to change the route or even the destination. There are various ways to change your route without the need to completely replan the entire journey. To change the current route, tap Change route in the Main menu: Tap this button to change the current route. This button is only shown while there is a planned route on your device.
traffic information services, go to tomtom.com/services. Tap this button to change the current destination. Change destination When you change the destination, you are shown the same options and asked to enter the new address in the same way as when you plan a new route. Tap this button to avoid part of the current route. Avoid part of route You are shown a list of the street names on your route. When you tap one of the street names, your device calculates a detour to avoid the selected street.
View map About viewing the map You can view the map in the same way as you might look at a traditional paper map. The map shows your current location and many other locations such as Favourites and POIs. To view the map in this way, tap View map or View route in the Main menu. You view different locations on the map by moving the map across the screen. To move the map, touch the screen and drag your finger across the screen.
View map 1. The scale bar 2. Traffic - current traffic incidents. Use the Options button to select whether traffic information is shown on the map. When traffic information is shown on the map, POIs and Favourites are not shown. Note: To use a TomTom traffic information service, you may need a subscription or a receiver. Traffic services are not supported in all countries or regions. For more information, visit tomtom.com/services. 3. Marker A marker shows the distance to a location.
5. The cursor with street name balloon Tap the button in the street name balloon to open the cursor menu. You can navigate to the cursor position, make a Favourite of the cursor position, or find a Point of Interest near the cursor position. 6. The Find button Tap this button to find specific addresses, favourites or Points of Interest. 7. The zoom bar Zoom in and out by moving the slider.
Tap this button to view information about the location on the map such as the address. View location Tap this button to create your own green marker and place it at the cursor position. If a green marker exists, this button changes to Delete marker. Set marker position Tap this button to find a POI near the cursor position on the map. For example, if the cursor currently highlights a restaurant location on the map, you can search for a nearby parking garage.
Map corrections About Map Share Map Share helps you correct map errors. You can correct several types of map error. To make corrections to your own map, tap Map corrections in the Settings menu. Note: Map Share is not available in all regions. For more information, go to tomtom.com/mapshare. Correcting a map error Important: For safety reasons, do not enter the full details of a map correction while you are driving. Mark the location of the map error instead and enter the full details later.
tion or a street on the map. 3. Select the street or section of a street you want to correct by tapping it on the map. The street you select is highlighted and the cursor shows the name of the street. 4. Tap Done. Your device shows the street and whether the traffic is blocked or allowed in each direction. 5. Tap one of the direction buttons to block or unblock the flow of traffic in that direction. 6. Tap Done.
Tap this button to change and report incorrect road turn restrictions. Change turn restrictions Tap this button to change and report the road speed limit. Change road speed Tap this button to add or remove a roundabout. Add or remove roundabout Tap this button to add a new Point of Interest (POI). For example to add a new restaurant near to your current location: 1. Tap Add missing POI. Add missing POI 2. Tap Restaurant in the list of POI categories. 3. Tap Near you.
Correct house number Tap this button to correct the location of a house number. Enter the address that you wish to correct and then indicate on the map the correct location of that house number. Tap this button to edit an existing street. Once you have selected the street, you can select an error to report. You can select more than one type of error for a street. Existing street Tap this button to report a missing street. You have to select the start and end points of the missing street.
Sounds and voices About sounds and voices Your Blue&Me-TomTom 2 LIVE device uses sound for some or all of the following: Driving directions and other route instructions Traffic information Note: To use a TomTom traffic information service, you may need a subscription or a receiver. Traffic services are not supported in all countries or regions. For more information, visit tomtom.com/services.
Tap Settings in the Main menu, then tap Volume and move the slider to adjust the volume. Tap Test to listen to the new volume level.
Settings About Settings You can change the way your Blue&Me-TomTom 2 LIVE device looks and behaves. Most of the settings on your device can be accessed by tapping Settings in the Main menu. Note: Not all settings described here are available on all devices. 2D/3D settings Tap this button to set the default view of the map. To switch between 2D and 3D views while driving, tap the left side of the status bar in the Driving View.
Enable automatic zooming in 3D view - when this setting is selected, you see a wider view when you are on motorways and a major roads. You then zoom in automatically as you approach junctions. Show lane images - when this setting is selected, a graphical view of the road ahead shows which lane you need when you approach a junction or motorway exit. You can choose to see a split-screen lane image, a full-screen lane image or you can switch off lane images altogether.
Home location Tap this button to set or change your Home location. You enter the address in the same way as you do when you plan a route. Home location Your Home location provides an easy way to plan a route to an important location. For most people, your Home location will be your home address. However, you might prefer to set the location to another regular destination, such as your workplace. Language Tap this button to change the language used for all the buttons and messages you see on your device.
To view or change an existing Favourite, tap one of the items in the list. To see more Favourites on the map, tap the left or right buttons. Manage POIs Tap this button to manage your own Point of Interest (POI) categories and locations. Manage POIs You can set your Blue&Me-TomTom 2 device to let you know when you are near to selected POI locations. For example, you could set the device to let you know when you are approaching a petrol station.
Connections Tap this button to open the Connections menu. Connections When not connected to Blue&Me, you can manage phones settings, and enable or disable Bluetooth and flight mode. If you disable Bluetooth or enable flight mode, you cannot connect your Blue&Me-TomTom 2 LIVE device to Blue&Me. You can also see Network and GPS status or go to the main menu of Blue&Me. The Blue&Me menu gives you access to the Blue&Me Preferences menu, described in the chapter Blue&Me controls.
Replanning settings Note: This setting is only available if your device has either a traffic subscription or an RDS-TMC Receiver. Traffic information is not available in all countries or regions. For more information about TomTom traffic information services, go to tomtom.com/services. Set whether you want your Blue&Me-TomTom 2 to replan the current route if a faster route is found while you are driving. This is useful if traffic builds up or clears further ahead on your route.
This includes items such as your Home and Favourite locations and your personal menu. Safety settings Tap this button to select the safety features you want to use on your device. Safety settings Clock Tap this button to select the time format. As soon as you have a GPS fix, the time will be set automatically. If you don't have a GPS fix, you can choose to set the time manually. Clock Units Tap this button to set the units used on your device for features such as route planning.
Start-up Tap this button to set what happens when your device starts. Start-up Me and my device Tap this button to find technical information about your Blue&Me-TomTom 2 LIVE, and to select whether you want to share information with TomTom. Me and my device A menu opens with the following options: Tap this button to find technical information about your Blue&Me-TomTom 2, such as the device serial number, application version and the map version.
To switch from the current map to plan a route in another country or region, simply tap this button. Note: The first time you switch to a map, you may need to connect to your MyTomTom account and activate the map. Turn off voice guidance / Turn on voice guidance Tap this button to switch off voice guidance. You will no longer hear spoken route instructions but you will still hear information such as traffic information and warnings.
Volume Tap this button to set the volume level for your device. Move the slider to change the volume.
Points of Interest About Points of Interest Points of Interest or POIs are useful places on the map. Here are some examples: Restaurants Hotels Museums Parking garages Petrol stations Creating POIs Tip: For help on managing third party POIs, search for "Third party POIs" at: tomtom.com/support. 1. Tap the screen to open the Main menu. 2. Tap Settings. 3. Tap Manage POIs. 4.
Tap this button to create a POI from a Favourite. Favourite You might want to create a POI from a Favourite because you can only create a limited number of Favourites. If you want to create more Favourites you need to delete some Favourites. To avoid losing a Favourite, save the location as a POI before you delete the Favourite. Tap this button to enter an address as a new POI. When you enter an address, you can choose from four options.
Tap this button to use Local Search with TomTom Places to search for shops and businesses in and around your current location. Local search You can choose to search for shops and businesses near you, near your destination, near any other destination or in a city. For example, if you are looking for a swimming pool near your current location, enter 'swimming pool' and choose the best search result. Using POIs to plan a route When you plan a route, you can use a POI for the destination.
The types of POI you have selected are shown as symbols on the map. Calling a POI Note: Hands-free calling is not supported on all navigation devices. Many of the POIs on your Blue&Me-TomTom 2 LIVE device include phone numbers. This means that if your device supports hands-free calling, you can use your device to call the POI as well as planning a route to the location of the POI.
Manage POIs Tap Manage POIs to manage your POI categories and locations. You can set your Blue&Me-TomTom 2 device to let you know when you are near to selected POI locations. In this way you could, for example, set the device to let you know you when you are approaching a petrol station. You can create your own POI categories and add your own POI locations to these categories. This means you can, for example, create a new POI category called Friends.
Help About getting help Tap Help in the Main menu to navigate to emergency services centres and other specialist services. If your device supports hands-free calling and your phone is connected to your device, you can contact emergency services directly by phone. For example, if you are involved in a car accident, you could use the Help menu to find and call the nearest hospital and tell them your exact location. Tip: If you do not see the Help button in the Main menu, tap Settings and then Safety settings.
Tap this button to navigate your way by car to a service centre. Drive to help Tap this button to navigate your way on foot to a service centre. Walk to help Tap this button to see your current location on the map. Where am I? If hands-free calling is supported on your device, and your phone is connected to your device, you can tap Where am I?. Select the type of service you want to contact and tell them your exact location as shown on your device.
Hands-free calling Important Important: This chapter covers the hands-free functionality of the navigation device when the navigation device is not connected to Blue&Me. When the navigation device is connected to Blue&Me, the phone functionality described in the first part of "Blue&Me-specific functions" applies. About hands-free calls Note: Hands-free calling is not supported on all devices.
Tap Phone number to enter a phone number to call. Tap Point of Interest to choose a Point of Interest (POI) to call. If your device knows the phone number of a POI, this is shown next to the POI. Tap Phonebook entry to select a contact from your phonebook. Note: Your phonebook is automatically copied to your Blue&Me-TomTom 2 device when you first establish a connection with your mobile phone. Not all phones can transfer the phonebook to your device. For more information, go to tomtom.
Tap this button to disable or enable hands-free calling. Disable hands-free Tap this button to make a phone call. Call Tap this button to change your home phone number. Change home number Tap this button to select information you want to delete. You can delete the list of recent callers and the list of recently dialled numbers. Delete Tap this button to change the auto-answer settings. Auto-answer settings Important: Not all phones are supported or compatible with all features.
Favourites About Favourites Favourites provide an easy way to select a location without the need to enter the address. They do not need to be favourite places, they can simply be seen as a collection of useful addresses. Creating a Favourite To create a Favourite, do the following: 1. Tap the screen to bring up the Main menu. 2. Tap Settings to open the Settings menu. 3. Tap Favourites. 4. Tap Add.
If you visit a POI you particularly like, for example a restaurant, you can add it as a Favourite. Point of Interest Tap this button to add your current location as a Favourite. For example, if you stop somewhere interesting, while you are there you can tap this button to create the Favourite. My location Tap this button to create a Favourite using the Map Browser. Select the location of the Favourite using the cursor, then tap Done.
2. Tap Navigate to or Drive to. 3. Tap Favourite. 4. Select a Favourite from the list. Your Blue&Me-TomTom 2 device calculates the route for you. 5. When the route is calculated, tap Done. Your device immediately starts guiding you to your destination with spoken instructions and visual instructions on the screen. Changing the name of a Favourite To change the name of a Favourite, do the following: 1. Tap the screen to bring up the Main menu. 2. Tap Settings to open the Settings menu. 3. Tap Favourites. 4.
Services About LIVE Services Note: LIVE Services are not available in all countries or regions, and not all LIVE Services are available in all countries or regions. You may be able to use LIVE Services when travelling abroad. For more information on available services, go to tomtom.com/services. The following LIVE Services may be available for your device. LIVE Services are subscription-based.
The renewal request is sent to TomTom. You should complete payment online, on or before the date shown on your device. Renewing your LIVE Services subscription using the TomTom website 1. Go to tomtom.com/getstarted to install MyDrive Connect, if it's not already installed, and start using MyDrive. 2. When prompted, connect your device to your computer using the USB cable. Then switch your device on.
The location is shown on the map. Tap Show info to see more information about this location. 6. Tap Select. About Speed Cameras Note: LIVE Services are not available in all countries or regions, and not all LIVE Services are available in all countries or regions. You may be able to use LIVE Services when travelling abroad. For more information on available services, go to tomtom.com/services.
Traffic About HD Traffic HD Traffic is a unique TomTom service providing real-time traffic information. For more information about TomTom services, go to tomtom.com/services. In combination with IQ Routes, Traffic helps you plan the optimum route to your destination taking into account the current local traffic conditions. Your Blue&Me-TomTom 2 LIVE device regularly receives information about the changing traffic conditions.
Safety Notice Some navigation devices contain a GSM/GPRS module which can interfere with electrical devices such as cardiac pacemakers, hearing aids and aviation equipment. Interference with these devices may endanger the health or life of you or others. If your device includes a GSM/GPRS module, do not use it near unprotected electrical units or in areas where the use of mobile telephones is prohibited, such as hospitals and aircraft.
1. Tap the traffic sidebar to open the Traffic menu. Note: If you already have a route planned, a summary of traffic incidents on your route is shown. Tap Options to open the Traffic menu. 2. Tap Show home-work traffic. 3. Set your home location and your work location. If you have already set the locations and want to change them, tap Change home-work. You can now use the Home to work and Work to home buttons.
Tap Minimise delays to check if you can reduce the delay. Tap Options to open the Traffic menu. Note: You can also access Minimise delays by tapping the traffic area of the LIVE Route summary tab, and then tapping options. Tap the left and right arrow buttons to move through each incident in turn, viewing the details of each one. This includes the type of incident, for example road works, and the length of delay caused by this incident.
The map shows traffic incidents in the area. 4. Tap on any traffic incident to get more information. A screen is shown that gives you detailed information about the incident you chose. To display information about surrounding incidents use the left and right arrows at the bottom of this screen. Changing traffic settings Use the Traffic settings button to choose how traffic information works on your navigation device. 1. Tap the traffic sidebar then tap Options to open the Traffic menu. 2.
Symbols shown in a red triangle are weather related. Your device does not replan to avoid these warnings. Traffic incident symbols: Accident Road works One or more lanes closed Road closed Traffic incident Traffic jam Weather related symbols: Fog Rain Wind Ice Snow Note: The incident avoided symbol is shown for any traffic incident that you avoid using a traffic service.
Tap this button to re-plan your route based on the latest traffic information. Minimise traffic delays Tap this button to calculate the quickest route from your home location to your place of work and back. Show home-work traffic Tap this button for an overview of traffic incidents along your route. Tap the left and right buttons for more detailed information about each incident. Show traffic on route Tap Minimise delays to replan your route and avoid the traffic incidents that are shown on the map.
Speed Cameras About Speed Cameras Note: LIVE Services are not available in all countries or regions, and not all LIVE Services are available in all countries or regions. You may be able to use LIVE Services when travelling abroad. For more information on available services, go to tomtom.com/services. The Speed Cameras service warns you about a range of speed cameras and safety alerts including the following: Fixed speed camera locations. Accident blackspot locations.
1. Tap Services in the Main Menu. 2. Tap Speed Cameras. 3. Tap Alert settings. A list of speed camera types is displayed. A speaker is shown next to the speed camera types that have been set for an alert. 4. Tap Fixed cameras. 5. Tap Next. 6. Tap the sound you want to be used for the warning. Tips: To switch off warning sounds for a camera type, tap Silence in step 7 above. You still see a warning in the Driving View if you switch off the warning sound. 7. Tap Done to save your changes.
Mobile camera hotspot Average speed check Accident black spot Bi-directional speed camera Ungated railway crossing Mobile speed camera Report button To show the report button in the Driving View, do the following: 1. Tap Services in the Main Menu. 2. Tap Speed Cameras. 3. Tap Show report button. 4. Tap Back. The report button is shown on left-hand side of the Driving View or if you are already using the quick menu, it's added to the buttons available in the quick menu.
Note: If the type of camera you choose has a speed restriction, you can also enter the speed. 2. You see a message confirming that a report has been created. Reporting a new speed camera while at home You do not need to be at the location of a speed camera to report the new location. To report a new speed camera location while you are at home, do the following: 1. Tap Services in the Main Menu on your navigation device. 2. Tap Speed Cameras. 3. Tap Report safety camera. 4.
This type of camera monitors traffic at toll road barriers. Toll road camera This type of camera checks the speed of passing vehicles and can be moved to different locations. Mobile camera All other types of camera that do not fall into any of the above categories. Other camera Average speed check camera warnings There are several types of visual and audible warnings that you may see and hear when you meet an average speed check camera.
End of zone warning As you approach the end of an average speed check zone, you see a visual warning in the Driving View with a distance to the camera shown underneath it. You hear an audible warning. You also see a small icon on the road showing the position of the average speed check camera at the end of the zone. Speed Cameras menu To open the Speed Cameras menu, tap Services in the Main Menu and then tap Speed Cameras. Tap this button to report a new speed camera location.
Weather About Weather Note: Only available on LIVE devices. The TomTom Weather service provides detailed weather reports and 5-day weather forecasts for towns and cities. The information is provided by local weather stations and is updated hourly. Note: For more information on available services, go to tomtom.com/services. Requesting a weather report To request a weather report for a specific location, such as the town or city for your final destination, do the following: 1. Tap Services in the Main Menu.
Tap this button to select a Favourite location. Favourite Tap this button to enter an address. Address Tap this button to select a location in a list of recently used destinations. Recent destination Tap this button to select a location using a local search with TomTom Places. Local search Tap this button to select a Point of Interest (POI). Point of Interest Tap this button to select your current location. My Location Tap this button to select a point on the map.
Tap this button to select your last recorded position.
Expedia and TripAdvisor Finding a POI You can search for a POI using TripAdvisor or Expedia and then navigate to it immediately using your navigation device. To search for a hotel, for example, do the following: 1. Tap Services in the Main menu. Tip: When planning a route to a POI, you can also select POIs provided by TripAdvisor and Expedia after selecting a POI category. 2. Tap TripAdvisor or Expedia. 3. Tap In city. You can search in different ways: near you, near home or near your destination. 4.
MyDrive About MyDrive MyDrive is a web-based tool that helps you manage the contents and services of your Blue&Me-TomTom 2 LIVE navigation device. You use MyDrive to get map updates as well as lots of other things. You log in to MyDrive on the TomTom website. It is a good idea to frequently connect your navigation device to MyDrive to ensure you always have the latest updates. Tip: We recommend using a broadband internet connection whenever you connect your navigation device to MyDrive.
Note: You should plug the USB cable directly into a USB port on your computer and not into a USB hub or USB port on a keyboard or monitor. 5. Enter the requested information for account creation, including your country. When set-up is complete, a MyTomTom account is created and your navigation device is linked to that account. You can now access MyDrive Connect from the notification area on your desktop. MyDrive starts automatically after the account is created.
Customer support Getting help to use your navigation device You can get further help by going to tomtom.com/support. For warranty information, go to tomtom.com/legal. Me and my device Tap this button to find technical information about your Blue&Me-TomTom 2 LIVE, and to select whether you want to share information with TomTom.
Addendum Important Safety Notices and Warnings Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) The Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) systems are satellite-based systems that provide location and timing information around the globe. GPS is operated and controlled under the sole responsibility of the Government of the United States of America, who are responsible for its availability and accuracy.
Battery This product uses a Lithium-Ion battery. Do not use it in a humid, wet and/or corrosive environment. Do not put, store or leave your product in or near a heat source, in a high temperature location, in strong direct sunlight, in a microwave oven or in a pressurised container, and do not expose it to temperatures over 60°C (140°F). Failure to follow these guidelines may cause the battery to leak acid, become hot, explode or ignite and cause injury and/or damage.
R&TTE directive Hereby, TomTom declares that TomTom products and accessories are in compliance with the essential requirements and other relevant provisions of the EU Directive 1999/5/EC. The declaration of conformity can be found here: tomtom.com/legal. WEEE directive The wheelie bin symbol on the product or its packaging indicates that this product shall not be treated as household waste.
Exposure limits This device complies with radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. This document Great care was taken in preparing this document. Constant product development may mean that some information is not entirely up to date. The information in this document is subject to change without notice.
Copyright notices © 2013 TomTom. All rights reserved. TomTom and the "two hands" logo are registered trademarks of TomTom N.V. or one of its subsidiaries. Please see tomtom.com/legal for limited warranty and end user licence agreements applying to this product. © 2013 TomTom. All rights reserved. This material is proprietary and the subject of copyright protection and/or database rights protection and/or other intellectual property rights owned by TomTom or its suppliers.
