Operation Manual

26
Route type
Adjust this option to set the type of route that will be planned when you plan a new route.
You can select the following types of route:
 Always ask me - if you select this option, you are always asked to select the type of route that
should be planned.
 Fastest route - the fastest route to your destination.
 Shortest route - the shortest route to your destination. This may take much longer than the
fastest route.
 Eco route - always plan the most fuel-efficient route.
 Walking route - this type of route is optimised for walking.
 Bicycle route - this type of route is optimised for bicycles.
 Avoid motorways - this type of route avoids all motorways.
 Limited speed - if you select this type of route, you must enter a maximum speed for your
vehicle. The route planned takes this restriction into account.
You can set how each of the following road types is handled when a new route is planned:
 Toll roads
 Ferry crossings
 Carpool lanes
 Unpaved roads
You can set the following actions to be taken for each type of road:
 Always avoid - the type of road is always avoided automatically.
 Never avoid - the type of road is never avoided automatically.
 Ask - when the route is planned, you have to select how to handle these roads when they
occur on your route.
Advanced settings
Advanced settings
Tap Advanced settings to adjust the following settings:
Show lane guidance images
Adjust this setting to switch lane images on and off.
Lane images help you prepare for motorway exits and junctions by showing you which lane you
should be in.
Plan IQ Routes
Adjust this setting to switch IQ Routes on and off.
IQ Routes is used when you plan a route. Your route is calculated using information about the real
average speeds measured on roads, so your route may change depending on the time of day and
day of the week.