Instructions/Assembly Guide

WE STRONGLEY RECOMEND THIS UNIT IS ATTACHED TO THE

WALL TO PREVENT TOPPLING. KEEPING YOU SAFE FROM INJURY.

Assembly steps to attach your furniture to a wall

1. Use a pencil to mark the fixing positions on the wall - ensure the drill hole

position is under product top panel.

2. Drill holes (ensure the hole position is hidden by product) and insert wall

plug (C) into wall.

3. Attach L Bracket (D) into plug (C) in wall and fasten by screw (A) with

screwdriver (not provided).

4. Attach L Bracket (D) on back of product and fasten by screw (B) with

screwdriver (not provided).

5. Place the product against the wall, secure L Bracket (D) to the L Bracket

(D) on wall by Lock Pin (E) as image shown.

Warning:

1. Please note this item needs to be fixed on the wall to prevent falling

forward when product is in use.

2. Always ensure that intended wall area to be drilled is free from hidden

electrical wires, water and gas pipes.

NB: Wall fixings are included - if not suitable - Please source suitable fixings

for your wall type. If in doubt please consult a qualified trades person.