Manualshelf

Instructions / Assembly

ManualsBrandsTommy Docks ManualsBoat Docks32 ft. Roll-In-Dock Straight System with Aluminum Frame and Gray Composite Removable Decking
12345678910
5
Insert the center I-Beam into the End Rail as shown (5a). Make sure notch in I-Beam engages Top Flange of
Side Rail (5b). The top flange of the I-Beam goes on top of the End Rail Flange and the Bottom Flange of the
I-Beam sits on top of the Bottom Flange of Side Rail (5c). Insert the screws and locknuts (5d) and hand tighten
(5e).
End Rail
Center
I-Beam
Bottom Flange
of I-Beam
Top Flange
of I-Beam
Top Flange
of Side Rail
Bottom Flange
of End Rail
Top Flange
of End Rail
End Rail
Notch
5a
5c
5d
4x 4x
5b
5e
Center
I-Beam