Full Product Manual

A
B
1
A
B
2
A
B
1
A
B
2
5
Place Aluminum Brackets onto boards.
6
In order to align Aluminum Brackets properly,
position the two (2) provided Bracket Aligners
next to each Aluminum Bracket toward the
“STARTING EDGE” end. Make sure Bracket
Aligners are flush with all four (4) corners of
boards. Flip Bracket Aligner and run down the
edge to maintain distance of Aluminum Bracket
from edge of boards.
7
Using the Provided Driver Bit, secure Aluminum
Brackets to End Boards using two (2) 3/4” (#12)
Fastener-A per corner.
DO NOT OVER TORQUE
Slowly screw in fastener heads no more than one
full turn so head makes contact with aluminum.
Over torquing screws will cause stripping.
3/4” (#12)
Fastener-A
(full threaded)
(Qty 8)
2
2
A
B
1
A
B
2
Bracket Aligner
(Qty 2)
BRACKET
ALIGNER
ALUMINUM
BRACKET
END BOARD
3/4” (#12)
FASTENER-A
ALUMINUM
BRACKET
END BOARD