Manualshelf

Full Product Manual

ManualsBrandsTommy Docks ManualsBoat Docks32 ft. Roll-In-Dock Straight System with Aluminum Frame and Gray Composite Removable Decking
12345678910
A
B
1
A
B
2
A
B
1
A
B
2
1
Place Template 2 on top of Template 1.
2
Align “A” Arrows and align “B” Arrows. Once
arrows are aligned, tape both templates together.
3
Begin by laying out the provided 48" x 48" Paper
Template on a flat surface such as a floor or a
sheet of plywood. Place Composite Boards into
indicated "PLACE BOARD HERE" area making
sure to keep wood grain finish facedown.
IMPORTANT: When aligning Composite Board,
make sure you align it along the edge of template
labeled “STARTING EDGE”.
NOTE: Very important to make sure the wood
grain texture of the board is facedown during this
step. This will be the finished dock top.
4
Continue placing Composite Boards onto 48” x 48”
Paper Template making sure to keep wood grain finish
facedown.
NOTE: Very important to make sure the wood grain
texture of the board is facedown during this step.
This will be the finished dock top.
COMPOSITE BOARD
A
B
1
A
B
2
STARTING EDGE STARTING EDGE STARTING EDGE STARTING EDGE STARTING EDGE
A
B
1
A
B
2
A
B
1
A
B
A
B
1
A
B
STARTING EDGE STARTING EDGE STARTING EDGE STARTING EDGE STARTING EDGE
A
B
1
A
B
2