Manualshelf

Instructions / Assembly

ManualsBrandsTommy Docks ManualsBoat Docks20 ft. Roll-In-Dock Straight Aluminum Frame With Removable Cedar Decking Complete Dock Package
45678910111213
16
Flip the frame over to install the remainder of the fasteners into the frame. Where indicated install
Stainless Steel Hex Head Bolt and Stainless Steel Nylon Locknut (16a). Use the 5/16” Driver Bit to
fully tighten the Stainless Steel Hex Head Bolt while holding in place the Stainless Steel Nylon
Locknut with a 3/8” Box End Wrench (16b).
NOTE: When assembling the frame components, if you encounter holes that do not line up exactly, it
is acceptable to use a drill to ream out the holes slightly for the fasteners to fit appropriately.
20x 20x
Hex
Bit
5/16” Driver Bit
3/8” Box
End Wrench
Stainless Steel
Hex Head Bolt
Stainless Steel
Hex Head Bolt
Stainless Steel
Hex Head Bolt
Stainless Steel
Nylon Locknut
16a
16b