Installation Guide

Tommy Docks 4003 Dixie Ave, Wausau, WI 54401 http://www.tommydocks.com custserv@tommydocks.com

Phone - 715.842.3804 Toll Free – 866.675.1880 Fax – 715.842.3420

You now have all the frame components attached to the

frame except the last End Rail. Make sure all the

connections are fitted tightly and tighten all the screws

you have installed so far on the top side of the frame.

This illustration shows the remaining connection of the

Crossmember into the Side Rail that remains unattached.

The purpose for this is to allow room to slide individual

boards into place in the forward section for the frame. (If

you are planning on making removable drop in deck

panels for the frame you can disregard this step and

install the screws and tighten this connection to the Side

Rail.)