Project Ideas

36” x 48” x 16”
tommydocks.com
Toll Free 866.675.1880
Phone [phone]
Fax [phone]
Dock/Kayak Platform Example Below
Dimensions
Quantity and Size of Stringers
Decking Size
Decking Type
10’ x 20’
5/4” x 6” or 2” x 6” Decking
(x9) 2” x 8” Stringers
Pressure Treated Lumber or Composite
This is intended as a guide-line only and is not
warrantied by Tommy Dock Products LLC, please
consult a professional with questions or concerns.
Dock Floatation Summary
Framing Hardware Summary
Lumber Summary
Optional Accessories
(x8) TD-30034 Flange Dock Float
(x46) 3/8” x 4” Stainless Steel Lag Bolts
(x48) 3/8” Stainless Steel Fender Washers
(x4) Outside Corners
(x4) Inside Corners
(x22) Angles (2 per internal stringer)
(x24) Washer Plates (4 per internal stringer)
(x120) Carriage Colt Sets (1/2” x 3” bolt/washer/hex nut)
(x800) 3” Stainless Steel Decking Screws
(x2) D(x2) Driver #2 Square (for decking screws)
(x2) 2” x 8” x 10” Fascia/End Boards
(x9) 2” x 8” x 10” Stringers/Joints
(x43) 5/4 x 6” x 10’ or 2” x 6” x 10’ Decking Boards
*Extra 2” x 8” lumber required for blocking b/w stringers
and over oats.
Straight Bumpers
Dock Line
Flip Up Cleats
Dock Ladders