Instructions / Assembly

9
Align the Support Braces to the pre-drilled holes on the Ratchet Mount and secure using two (2) 2-½” Partially
Threaded Bolts and two (2) Steel Nuts. Align the Support Braces to the bottom pre-drilled holes on the 4ft
Support Rest and secure using two (2) ¾” Threaded Bolts and two (2) Steel Nuts.
9a
Support Brace
4ft Support Rest
9b
www.tommydocks.com
8
Mount the Winch using three (3) 3” Partially Threaded Bolts, (6) Flat Washers, (3) Nyloc Locknuts.
Winch