Instructions / Assembly

7
Align 4ft Support Rest to Ratchet Mount (7a) and fasten using two (2) 2-¾” Partially Threaded Bolts, four (4)
Flat Washers and two (2) Nyloc Locknuts (7b).
www.tommydocks.com
7a
7b
Ratchet Mount
4ft Support Rest
5 6
Fit the Trunk Mount Front over the Forward Trunk
Assembly (5a) and fasten them together using
two (2) 5” Partially Threaded Bolts, four (4) Flat
Washers, and two (2) Nyloc Locknuts (5b).
Run the Ratchet Mount through the Trunk Mount
Front to the designated height (6a) and fasten
them together using two (2) 5-½” Partially
Threaded Bolts, four (4) Flat Washers, and two (2)
Nyloc Locknuts (6b).
5a
5b
Trunk Mount
Front
Forward Trunk Assembly
6a
6b
Ratchet Mount
Trunk Mount Front