Specification

Adjustable Wrench Allen key
Philips Screwdriver
INSTALLATION MANUAL Tools You will need
Wall Mounted Basin Faucet Installation
Teflon Tape
1.Holes size for the built in control
valve:50*50*(40-45), the depth between the
bottom of the control valve to the tile surface
is 40-45MM
2.Use the tape on pipe threads, connected to the
main body (A) cold and hot as required inlet pipe
and outlet pipe, checking the leakage before
fixing the main body in the embedded hole (keep
the horizontal and vertical).
3. Remove the prastic cover (D) and then
put the base through the cartridge cover(C),
use Alleny key(E) and the hexagon socket
screw to assemble the handle(F) to the
body, and then put on the decorative
button(G).
COLD
HOT
F
E
G
D
C
4.Install the shower seat on the main body
and tighten it with screws.
Screw the hose connector to the main
body as well.
L
5.Add rubber washers (L) at both ends of
the shower hose (M).Connect shower
hose (M) to the wall supply holder (K) and
hand shower (N).Then, place the hand
shower (N) to the wall supply holder (K).
N
K
M
6.Finished