User Manual

ASSEMBLY CONFIGURATION

Cylinder Block

Main Stud (16)

※See installation

details below.

Main Bearing Cap

Crankshaft

CAUTION

■ Refer to the official workshop service manual, in regards to the other related parts, bearings etc. Be sure that

all parts are fitted and bolted back on with the correct torque values as specified in the service manual.

■ The clamp force on the Crank Bearing Caps will increase with the use of this product. New main bearings are

recommended. You'll have to check the clearances of all bearings again to be sure that the correct

clearances are obtained.

Washer (16)

Main Bearing Beam

Nut ※12 Sides (16)