Owner manual

6
KIT CONTENTS
Below is the contents of this kit with the quantity listed in brackets ().
※ The below illustration shows the GDB kit contents.
REQUIRED TOOLS
These tools are the bare minimum required for the job.
CAUTION
■ This product is designed to be used for off road competition purposes only.
■ This product is to be installed by a qualified professional in a fully equipped workshop.
■ This product was designed specifically for the application specified. If the attempt was made to use
this product on another engine/car other than specified then you will risk damaging this kit and or
the engine or components related with it.
■ This product is to be installed with the appropriate tools and equipment to prevent any engine failures
and injuries or bodily harm.
WARNING
■ This product is to be installed when the engine and engine bay is cold.
■ Please be sure that all parts are fitted correctly to avoid any possible fire risk hazards.
MAIN PIPE A (1)
BOLT SMOOTH PASTE (1)
EXPREME STICKER (2)
* General Engine Maintenance Tools * Torque Wrench * Service Manual
FLANGE NUT
M8 (1)
MAIN PIPE B (1)
SILENCER ASSY (1)
SPRING (4)
CLAMP BAND (2)
SILENCER BAND RUBBER (1)
SOUND REDUCER (1)
BUTTON BOLT (1)
6 POINT WRENCH (1)
FLANGE BOLT
M8 L=25 (1)
For JDM Models Only
FLANGE BOLT
M8 L=55 (2)
FLANGE NUT
M8 (2)
GASKET
t=4 (1)
t=2 (1)
FLANGE BOLT
M8 L=35 (2)
M10 L=35 (2)
FLANGE NUT
M8 (2)
M10 (2)
SILENCER BAND (1)
for USDM Models Only