Owner's manual

CAUTION
■ This product is designed for competition used ONLY. Not to be used on public roads.
■ The original safety standards of the vehicle will change, which will make it illegal to be used on public roads.
■ This product is to be fitted by an experienced professional in a fully equipped workshop.
■ This product is to be fitted with the correct tools, protective & safety equipment. Failure to do so can
lead to possible work hazards.
■ Refer to the vehicles original workshop service manual when disassembling the engine.
■ This product was specifically designed to be application specific. This is not a universal product. If
installed on any other vehicles/engines, this product may sustain damage and/or cause engine failure.
■ Designed specifically for performance use. All other parts will need to be checked during assembly to
ensure that everything is in excellent condition. If not, you run the risk of engine failure when used at high
engine speeds & power outputs. Meticulous attention to detail & precision assembly is a must for maximum
longevity & durability. Since this is a vital component of the engine, any mistakes made during assembly, will
cause terminal engine failure.
■ This product is to be installed when the engine and engine bay is cold.
■ Do not use excessive force when removing and installing parts. As this may cause damage to the parts
and related components.
■ Tighten each bolt with the torque specified with a torque wrench. If the bolt(s) loosens, damage to the
engine may result. Additional problems may arise if the bolts are not tightened to the specified torque specs.
REQUIRED TOOLS These tools are the bare minimum required for the job.
・General Engine Maintenance Tools ・Torque Wrench ・Angle Wrench ・Heatproof Lubricant
・Thread Lock Paste ・Workshop Service Manual ・M11 x P1.5 Tap ・Tap Handle, Tapping Paste
KIT CONTENTS Below is the contents of this kit, with the
q
uantit
y
listed in the brackets ().
5
KIT
CONTENTS
Below
is
the
contents
of
this
kit
,
with
the
quantity
listed
in
the
brackets
()
.
Nut (10)
Stud Bolt (10)
Head
Block
Concentration
ofclampforce
Widerareaof
clampforce
Pointedtipto
fillthehole
STOCK BOLT STUD BOLT
Assembly Nut (4)
5