User Manual

KIT CONTENTS
Below is the contents of this kit with the quantity listed in brackets ().
REQUIRED TOOLS The following tools are recommended for the installation process.
CAUTION
■This product was designed for competition use ONLY, for use on closed circuits.
■This product has been designed for competition use only and is not to be used on any public roads.
■This product is to be fitted by an experienced professional in a fully equipped workshop.
■This product was specifically designed for the vehicle application as stated above. This is not designed and may
not be suitable for other cars/engines other than stated in this manual. If this product/kit is installed on any other
vehicles/engines it may damage this product and /or the engine /vehicle that it is fitted to.
■This product is to be fitted with the correct tools, protective & safety equipement. Failure to do so can lead to
possible work hazards.
■This Solid Pivot kit (shim adjustment system) is designed to be used with the "Solid type" Camshafts
(sold seperately).
WARNING
■This product is to be installed when the engine and engine bay is cold.
■Please be sure that all parts are fitted correctly to avoid any possible fire risk hazards.
INSTALLATION PREPARATION
Cut the rocker arms that you will be
using as shown on the left.
・Do the same to all rocker arms
which will be used.
・Cut both sides that use shims and guides.
7
・General Maintenance Tools ・Tor que Wr ench ・Wor ks hop Ser vi ce Manual
・ Cams haf t s t o s ui t t he Sol i d Pi vot Conver s i on ( Adj us t ed wi t h Shi ms )
※ If you only have the "Solid Pivots", then you'll need our Test Shims & Guides
t o check your cl ear ance.
SOLID PIVOT （8）
Included With "SOLID PIVOT SET" ONLY
Test Shims
t=2.800(×4)・・・INTAKE
t=2.700(×4)・・・ＥＸHAUST
Test Guides
t=2.800(×4)・・・INTAKE
t=2.700(×4)・・・ＥＸHAUST
Approx 0.5mm
Approx 2～3mm