User Manual

(7) CAM CLEARANCE VERIFICATION

Please select and install the shim that has been prepared. Measure the cam clearance again for the second time

to check if you have the correct clearance. Repeat if required till you have the correct size.

(For any other shim or guide sizes that are not listed on the chart, you'll then have to make them to suit

your needs with the appropriate machinery.)

【SOLD SEPERATELY】

Test Shims, Test Guides Set

PART NUMBER : 163004

t=2.800(×4)・・・INTAKE t=2.800(×4)・・・INTAKE

t=2.700(×4)・・・EXHAUST

t=2.700(×4)・・・INTAKE

SHIM (THICKNESS/PART NUMBER) The size noted in () is Nissan Genuine Part.

Shim Guide

2.600

161009 2600 2.900 161009 2900

2.600

161010 2600

2.620

161009 2620 2.920 161009 2920

2.620

161010 2620

2.640

161009 2640 2.940 161009 2940

2.640

161010 2640

2.660 161009 2660 2.960 161009 2960 2.660 161010 2660

2.680 161009 2680 2.980 161009 2980 2.680 161010 2680

2.700 161009 2700 3.000 161009 3000 2.700 161010 2700

2.720 161009 2720 3.020 161009 3020 2.720 161010 2720

2.740 161009 2740 3.040 161009 3040 2.740 161010 2740

2.760 161009 2760 3.060 161009 3060 2.760 161010 2760

2.780 161009 2780 3.080 161009 3080 2.780 161010 2780

2.800 161009 2800 3.100 161009 3100 2.800 161010 2800

2.820 161009 2820 3.120 161009 3120 2.820 161010 2820

2.840 161009 2840 3.140 161009 3140 2.840 161010 2840

2.860 161009 2860 3.160 161009 3160 2.860 161010 2860

2.880 161009 2880 3.180 161009 3180 2.880 161010 2880

3.200 161009 3200 2.900 161010 2900

2.920 161010 2920

2.940 161010 2940

2.960 161010 2960

2.980 161010 2980

(3.000)

Nissan

161010 2960

TEST SHIM

TEST GUIDE