Instruction Manual

CAUTION
■ This product is to be fitted by an experienced professional in a fully equipped workshop.
■ This product is to be fitted with the correct tools, protective & safety equipement. Failure to do so can lead to
possible work hazards.
■ Tighten each bolt with the torque specified with a torque wrench. If the bolt(s) loosens, damage to the engine
may result. Additional problems may arise if the bolts are not tightened to the specified torque specs.
■ Check regularly that everything is tightened and secured properly.
SPECIFICATIONS
ENGINE ITEM MATERIAL THICKNESS NOTES
RB26DETT THROTTLE GASKET Metal 0.4mm
INTAKE MANIFOLD GASKET Metal 0.38mm
EXHAUST MANIFOLD GASKET Metal 1.3mm 3 Layers
4AG EXHAUST MANIFOLD GASKET Metal 0.8mm
A INTAKE MANIFOLD GASKET 2.0mm M SIZE PORT
INSTALLATION POINTS & ILLUSTRATION
CAUTION
■ Clean the Gasket prior to installation.
■ Do not bend of deform the product.
■ Do not modify, process the Gasket sealing areas. If an attempt was made to enlarge the bore area
Bead
Bead
Grommet
TYPE
Bead
Bead
3
■ Do not modify, process the Gasket sealing areas. If an attempt was made to enlarge the bore area
of the Gasket, it will degrade the Gaskets sealing capability, or damage it entirely.
■ Install with the concave portion of the bead, facing the cylinder head side (main body
of the engine).
RB26DETT
INTAKE MANIFOLD GASKET
THROTTLE GASKET
EXHAUST MANIFOLD GASKET
4AG
EXHAUST MANIFOLD GASKET
3