User Manual

20
EXIT FEED LINE (With Hose)
CAUTION
■ Arrange the parts to be positioned free from interference with the hoses, so there's no tension.
■ Apply a small amount of engine oil to the tapered surface of the AN screw for lubrication.
Failure to do so can cause scratches and possible fuel leaks.
① Loosen the two bolts, then remove the solenoid valve.
② Fasten the solenoid valve to the regulator brackets.
③ Fasten the regulator to the bracket with 6mm bolts.
Hose B
Regulator
6mm Bolt
To Tank
Hose D
Fuel return line
Soleniod Valve
Regulator Bracket
Nut