User Manual

REMOVING THE STOCK PARTS

CAUTION

■ Work with minimal amount of gasoline in the tank.

■ Use high-pressure air to clean any dust and debris before removing any parts.

■ Drain all remaining gasoline from the piping, remove the drain hose. Use the pan

and rage to catch any spillages.

■ Use duct tape to block/cover any holes to prevent anything from entering the

engine after removing parts.

(1) Remove all gasoline from the fuel lines.

① Remove the fuel pump fuse.

R32 (Drivers side feet)

R33 (Inside the trunk)

② Start the engine.

③ After the engine stalls, crank the engine 3-4 more times to use all gasoline.

④

After turning the ignition off, disconnect the negative battery terminal.

⑤ Disconnect the injector connectors.

⑥ Remove the

vacuum hose

Injector

Damper

(R33 only)

⑦ Remove the

fuel pipe

Fuel filter