Instruction Manual

-9-
INSTALLATION
1. Install the side bolts supplied with the turbine.
Pay attention to the stud bolts direction
Short Long
※Turbine has the shorter side of the bolt.
※These are to be used with a double nut method.
※When removing the nut please ensure that the bolt
To be fitted in these 3 places
doesn't move.
2. The following parts are required to install the turbo.
【Required Parts】
①①EyeBolt(Small)
② Eye Bolt Gasket (Small)
②③Nut
④GasketA
※⑤WaterPipeA
⑥WaterPipeB
⑦ Eye Bolt Gasket (Big)
⑧EyeBolt(Big)
③⑨GasketB
⑩OilReturnPipeGasket
⑪OilReturnPipe
④⑫Bolt
【Torque Settings】
※ ⑤ ① 16 N・m (1.6kgm)
③ 35 N・m (3.6kgm)
⑧ 35 N・m (3.6kgm)
⑨ ⑦ ⑫ 4.4 N・m (0.45kgm)
⑦ ⑧ ※ 35 N・m (3.6kgm)
⑩
⑥
⑪
⑫
※ These are the OEM parts
to be reused.
When installing the pipes/tubes please be sure not to over tighten them or screw them on the
wrong way as you can damage these parts and/or related parts.