Manual

①
Fit the Camshafts knockpin in the Cam gear Knock Pin hole.
②
Tighten the Adjustable Cam Gear Mounting Bolts with a Sprocket Wrench to the required torque specs.
ADJUSTABLE A12/14/15 4.0∼1.9kgf・m (39.2∼44.1N・m)
CAM GEAR BOLT L6 14.0∼16.0kgf・m (137.3∼156.9N・m)
CA18DE(T) 1.4∼1.9kgf・m ［4］ (13.7∼18.6N・m)
VG30DE(TT) IN 12.5∼13.5kgf・m (122.6∼132.4N・m)
VG30DE(TT) EX 1.4∼1.9kgf・m ［4］ (13.7∼18.6N・m)
SR20DE(T) 13.0∼14.0kgf・m (128.3∼137.3N・m)
RB20/25/26 1.4∼1.9kgf・m ［4］ (13.7∼18.6N・m)
(Excluding NVCS）
4G63 9.0kgf・m (88N・m)
1JZ-G(T)E/2JZ-G(T)E 8.0kgf・ｍ (78.5N・m）
(Excluding VVTi Pulley）
4AG 4VALVE 4.8∼5.5kgf・m (47.1∼54.0N・m)
EJ20/25 3.0kgf・m→35°※ (29.5N・m→35°)※
※Use a Torque Angle Gauge for EJ Engines.
③
Adjust the valve timing.
Scale Reading (SLIDE TYPE)
ENGINE TORQUE SPECS
(SPROCKET)
(WHEEL)
CRANK
ANGLE 2°
CRANK ANGLE 20°
④
Please tighten the slide section bolts to the stipulated torque.
SLIDE SECTION SLIDE TYPE 0.8kgf・m∼1.0kgf・m
(SLIDE TYPE) ALL CARS (7.85N・m∼9.8N・m)
6
ENGINE TORQUE SPECS
CRANK ANGLE 20