Instruction Manual

ManualsBrandsTomei Powered ManualsCar3.692 FINAL GEAR SET (R34)

FRONT LEFT SIDE BEARING PRELOAD ADJUSTMENT SHIMS

REAR SIDE ADJUSTMENT BEARING SHIMS

・Verify the tooth contact pattern……Adjust the thickness of the pinion shim height.

FRONT Drive Pinion Adjust Shims

REAR PINION HEIGHT ADJUSTMENT SHIMS

1.61

38453-03V00

2.53~2.57

2.48~2.52

2.43~2.47

Thickness (mm)

38453-03V01

38453-03V02 38453-03V07

1.19

1.13

1.10

Thickness (mm)

1.07

1.04

1.01

Thickness (mm)

1.16

1.31

1.28

1.25

1.22

2.63~2.67

2.58~2.62

1.43

1.40

1.37

Thickness (mm)

38453-03V052.18~2.22

Thickness (mm)

2.00

1.97

1.94

1.91

1.88

1.82

1.79

1.76

1.73

Thickness (mm)

3.15

3.12

3.09

1.34

38453-03V03 38453-03V08

Thickness (mm)

3.27

3.24

3.21

3.18

Part No. Part No.

2.13~2.17

2.08~2.12

2.03~2.07

1.98~2.02

1.93~1.97

38453-03V06

2.28~2.32

2.23~2.27

38453-15U63

38453-15U62

38453-15U24

2.38~2.42

2.33~2.37

38453-15U67

38453-15U60

38453-15U61

38453-15U66

1.85

Part No.

38453-03V10

38453-03V12

Part No.

38453-03V13

38453-03V14

38453-03V11

38453-03V04 38453-03V09

3.66

Thickness (mm)

Part No.

38453-15U00 38453-15U12

Part No.

38453-15U01 38453-15U13

38453-15U02 38453-15U14

38453-15U03

38453-15U04 38453-15U16

38453-15U15

38453-15U05 38453-15U17

1.46

1.52

1.49

38453-15U06 38453-15U18

38453-15U64

38453-15U65

1.58

1.55

38453-15U07

38453-15U08 38453-15U20

38453-15U19

38453-15U68

38453-15U10 38453-15U22

38453-15U09 38453-15U21

1.67

1.64

38453-15U11 38453-15U23

3.30

Part No.Thickness (mm)Thickness (mm)Part No. Part No.

1.70

3.36

38154-U1500 38154-U1507 38154-U1514

3.57

3.33

3.51

38154-U1519

38154-U1501 38154-U1508

38154-U1517

38154-U1502 38154-U1509

38154-U1515

38154-U1516

3.54

3.39

38154-U1518

38154-U1503

38154-U1504 38154-U1511

38154-U1510

3.42 3.63

3.60

Thickness (mm)

Part No.

Thickness (mm)

38154-U1505 38154-U1512

38154-U1506

Part No.

38154-U15133.48

3.45

Chang the pinion height washer thickness to change the pinion position, will also change the backlash

setting as well. When you adjust the side bearing shims & pinion height adjustment washers, for setting the

preload and backlash please also check the gearing teeth alignment again.

8. Apply the liquid silicon gasket to the carrier cover before sealing it.

9. Fit the final drive assembly to the vehicle and fill with the appropriate LSD differential gear oil,

up to the filler plug.

2. INSTALLATION VERIFICATION

Please verify that there are no signs of oil leaks from the diff housing and or car.

3.66

3.63

3.60

3.57

3.54

38154-P6020 3.39

3.51

Thickness (mm)

3.09 38154-P6024

Part No.

38154-P6017

Part No.

Thickness (mm)

3.30

38154-P6034

38154-P6032

Part No.

38154-P6031

38154-P6033

3.12

38154-P6019

38154-P6018

3.18 38154-P6027

38154-P6025

3.36

3.33

38154-P602938154-P6022 3.453.24

3.15 38154-P6026

3.423.21 38154-P6028 38154-P6035

38154-P60303.27 38154-P6023 3.48

38154-P6036

38154-P6021

Heel Contact Point Face Contact Point

The Drive Pinion is brought closer to the ring

Flank Contact Point

Toe Contact Point

Crown ring & Pinion Gear is further apart.