Manualshelf

Use and Care Manual

ManualsBrandsTomahawk ManualsBuilding materials12 ft. Concrete Surface Vibratory Screed Blade Board
11121314151617181920
Page 12 of 23
Starting the Engine
1.
Perform all the Before Each Use steps.
2.
To start a cold engine, move the choke lever to the CLOSED position.
If restarting a warm engine leave the choke lever in the OPEN position.
3.
Press the priming bulb repeatedly until fuel can be seen inside the clear plastic bulb.
4.
Move the throttle lever slightly in the direction of the arrow.
5.
Pull the starter rope (Figure 03) lightly until you feel resistance, then pull briskly in the direction of the ar-
row. Return the starter rope gently.
6.
Once the engine has started, open the choke and allow engine to idle for 3 to 5 minutes to warm-up.
Operating Instructions
Read and understand both the screed user’s manual (this manuals) and the engine manual before starting or
operating the screed to avoid incorrect operation that may result in damage or injury.