TWG210A WELDER GENERATOR Operation and Instruction Manual
Table of Contents 2
Engine Hazards California Prop 65 warnings 6
Product Specifications 7
Wheel Kit Assembly Step 1: Lay out wheels, axle, pegs, screws, bolts, and washers. Step 2: Attach axle using 2 clamps with nuts and bolts, add wheels, next attach pegs in front of generator finally attach handles using pins and clips.
Selecting Cabling Sizes Amperage and Electrode Selection Chart 9
WELDER GENERATOR PANEL 10
STARTING THE WELDER GENERATOR 13
Installing Generator Welder to Truck Bed 14
Connecting the Battery 15
Welding 101 Striking an Arc 16
Poor Weld Examples Good Weld Examples 17
Conditions that affect weld shape Recommended Weld Movement 18
Welding Lap Joints Welding Groove Joints 19
Welding Tee Joints Weld Test 20
Regular Maintenance 3 Tips for Keeping your Welder in Good Shape 1. Change Oil Regularly 2. Change Air Filter Regularly 3.
Welding Troubleshooting For further assistance please call Tomahawk Toll Free at 1-866-577-4476 or visit us on our website at www.tomahawk-power.
