Operations Manual

10
4.3 Motor Oil
Use Honda 4-stroke oil, or use an equivalent high detergent, premium quality motor oil
certified to meet or exceed U.S. automobile manufacturer’s requirements for Service
Classification SG, SF. Motor oils classified SG, SF will show this designation on the container.
SAE 10W/30 is recommended for general, all-temperature use. Other viscosity grades (see
Figure-4) may be used when the average temperature in your area is within the indicated
range.
4.4 Checking Oil
When checking oil, observe the following (refer to Figure-5):
4.4.1 Make sure the engine is in a level position.
4.4.2 Remove the oil filler cap/dipstick and wipe it clean.
4.4.3 Insert the filler cap/dipstick into the oil filler neck, but do not screw it in.
4.4.4 Remove the filler cap/dipstick and check the oil level.
4.4.5 If the level is low, fill to the top of the oil filler neck with the recommended oil.
4.4.6 Reinstall the oil filler cap/dipstick.
FIGURE-4
FIGURE-5