TVSA T Operations Manual

19




11. How to Screed Form to Form
11.1 In order to screed form to form, the
length of the blade should overlap both
form boards on each side of the pour.
11.2 When screeding off of forms, keep the
bottom of the blade as flat as possible.
11.3 Extend the life of your blade by using
the lowest vibration setting in relation to
the slump of concrete being used.






Be aware of elevated trailing edges. This
can create an area for concrete to build up,
resulting in an uneven slab elevation.
Be aware of elevated leading edges. This
can trap rocks in between the blade,
resulting in an uneven slab elevation.