TVSA T Operations Manual

11
5. Operation
5.1 Perform all steps in sections 3.1; 3.2; and 3.3.
5.2 To start a cold engine, move the choke lever
(Figure 1) to the CLOSED position.
If restarting a warm engine leave the choke lever in
the OPEN position.
5.3 Press the priming bulb (Figure 2) repeatedly
until fuel can be seen inside the clear fuel lines.
5.4 Move the throttle lever slightly to give the
engine some speed.
5.5 Pull the starter rope (Figure 3) lightly until you
feel resistance, then pull briskly in the direction of
the arrow.
Return the starter rope gently.
5.6 Once the engine has started, open the choke
and allow engine to idle for 3 to 5 minutes to
warm-up.
Figure 1
Figure 2
Figure 3