Use and Care Manual

7
Safe operating practices
When operating this machine do:
Remain aware of the machine’s moving parts. Keep hands, feet, and loose clothing
away from the machine’s moving parts
Always remain seated and wear the seat belt at all times while operating the machine.
Keep clear of the articulated steering joint between the front and rear frames.
Always disengage and stow the locking bar for the articulated steering joint before
operating the machine. The machine cannot be steered when the locking bar is
engaged.
When operating this machine:
Do not operate a machine in need of repair.
Do not drive over curbs or other uneven objects that will result in the machine and
operator being shaken.
Do not attempt to start the machine when standing alongside it. Only start the engine
when seated in the driver's seat and with the forward/reverse control in the neutral
position.
Do not leave the machine running unattended.
Do not use a cellphone or send text messages while operating this machine.
Do not consume the operating fluids used in this machine. Depending on your
machine model, these operating fluids may include water, wetting agents, fuel
(gasoline, diesel, kerosene, propane, or natural gas), oil, coolant, hydraulic fluid, heat
transfer fluid (propylene glycol with additives), battery acid, or grease.
Personal Protective Equipment
Wear the following Personal Protective Equipment (PPE) while operating this machine:
Hard hat
Safety shoes
Safety glasses, goggles, or face shield
Heavy duty gloves
Hearing protection
Reflective clothing
Wet weather gear
Respirator or filter mask
Wear whatever is needed to protect yourself—don’t take chances.
WARNING: Avoid death or serious injury from entanglement. Do not
wear loose or frayed clothing or accessories that could catch on
moving parts. Examples of items to avoid include flopping cuffs,
dangling neckties and scarves, wallets attached to chains, jewelry and
wrist watches.
After use
Stop the engine when the machine is not being operated.
Close the fuel valve on engines equipped with one when the machine is not being