Use and Care Manual
55
Grease Fittings
See section Technical Data for oil quantity and type.
Articulation Joint Lockarm
The articulated joint is equipped with grease fittings (a) for lubrication.
WARNING
Pinching hazard.
To avoid being pinched by the machine halves, set the lockarm
before greasing the articulating joint!
Rear Drum
The rear drum drive bearing is equipped with a grease fitting (b) located at the center of
the drum behind the right rear drum support.
Exciter
The exciter is grease lubricated. There are two grease fittings (c), one on each side of the
machine, located behind the front drum supports.
Steering Cylinder
The steering cylinder is located under the operator’s platform. There is grease fitting near
the base and rod ends of the cylinder (d).