Use and Care Manual

50
Maintenance
WARNING
A poorly maintained machine can malfunction, causing injuries or
permanent damage to the machine.
 Keep the machine in safe operating condition by performing
periodic maintenance and making repairs as needed.
Periodic Maintenance Schedule
The table below lists basic machine and engine maintenance. Tasks designated with
check marks may be performed by the operator. Tasks designated with square bullet
points require special training and equipment.
Refer to the engine owner’s manual for additional information.
Daily
before
starting
Every
100
hours
Every
500
hours
Every
1000
hours
Check external hardware.
√
Check water filter.
√
Check level of hydraulic oil.
√
Check condition of hydraulic hoses and
connections.
√
Check electrical wiring and connections.
√
Check operation of parking brake and
make sure it engages.(if equipped)
√
Check operation of neutral safety switch.
√
Check seat belt.
√
Grease articulated joint.
◆
Grease rear drum drive bearings.
◆
Grease exciter bearings.
◆
Clean scraper bars.
√
Check battery.
◆
Grease steering cylinder ends.
◆
Clean water filter.
√
Change hydraulic system return line
filter.
1
◆
Clean battery terminals.
◆
Change hydraulic oil.
◆
1
Replace hydraulic system return line filter after first month or 100 hours of operation.