Use and Care Manual
48 
Operating on Slopes 
Background 
When operating on slopes or hills, special care must be taken to reduce the risk of 
personal injury or damage to the machine. 
Procedure 
Always operate the machine up and down slopes rather than from side to side. For safe 
operation and for protection of the engine, continuous duty use should be restricted to 
slopes of 15° (25% grade) or less. 
WARNING 
Crushing hazard. Never operate the machine sideways on slopes. The 
machine may tip or roll over even on stable ground. 
► Operate the machine straight up and down slopes. 
Surface conditions 
Pay attention to changing surface conditions while operating the machine. Adjust speed 
and travel direction as necessary to maintain safe operation. 
  Machine stability and traction may be severely reduced when operating on uneven or 
rough terrain, rocky soils, or wet or loosely packed surface material. 
  The machine may suddenly tip, sink, or fall when moved onto surfaces that have been 
newly filled with earth. 










